Install fails: Dell XPS 9380

Q&A
1

Hello all,

I’ve tried to get clear running a couple of times in the past, but with no luck. Tried again yesterday/today and I’m getting install failed errors… Here is the LOG:

2021/09/09 17:13:02 [DBG] Log Level set to LogLevelDebug (4)
2021/09/09 17:13:02 [INF] clr-installer-gui: 2.7.2-2-g9eac32df5b82, built on 2021-08-05_20:04:00_UTC
2021/09/09 17:13:02 [DBG] Loading config file: /var/lib/clr-installer/clr-installer.yaml
2021/09/09 17:13:02 [INF] Querying Clear Linux version
2021/09/09 17:13:02 [WRN] PrivateIP: Could not determine network location: lookup clr.telemetry.intel.com on 1.0.0.1:53: dial udp 1.0.0.1:53: connect: network is unreachable
2021/09/09 17:13:02 [DBG] localectl list-keymaps --no-pager
2021/09/09 17:13:02 [DBG] Using default shellProxy.DefaultGetProxyValue
2021/09/09 17:13:02 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:02 [DBG] cmd.Env:
2021/09/09 17:13:02 [DBG] timedatectl list-timezones
2021/09/09 17:13:02 [DBG] Using default shellProxy.DefaultGetProxyValue
2021/09/09 17:13:02 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:02 [DBG] cmd.Env:
2021/09/09 17:13:02 [DBG] locale -a
2021/09/09 17:13:02 [DBG] Using default shellProxy.DefaultGetProxyValue
2021/09/09 17:13:02 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:02 [DBG] cmd.Env:
2021/09/09 17:13:02 [DBG] Unable to use language locale ‘agr_PE.UTF-8’
2021/09/09 17:13:02 [DBG] Unable to use language locale ‘ayc_PE.UTF-8’
2021/09/09 17:13:02 [DBG] Unable to use language locale ‘ber_DZ.UTF-8’
2021/09/09 17:13:02 [DBG] Unable to use language locale ‘ber_MA.UTF-8’
2021/09/09 17:13:02 [DBG] Unable to use language locale ‘bhb_IN.UTF-8’
2021/09/09 17:13:02 [DBG] Unable to use language locale ‘hne_IN.UTF-8’
2021/09/09 17:13:02 [DBG] Unable to use language locale ‘miq_NI.UTF-8’
2021/09/09 17:13:02 [DBG] Unable to use language locale ‘mjw_IN.UTF-8’
2021/09/09 17:13:02 [DBG] Unable to use language locale ‘mnw_MM.UTF-8’
2021/09/09 17:13:02 [DBG] Unable to use language locale ‘nhn_MX.UTF-8’
2021/09/09 17:13:02 [DBG] Unable to use language locale ‘shs_CA.UTF-8’
2021/09/09 17:13:02 [DBG] Unable to use language locale ‘the_NP.UTF-8’
2021/09/09 17:13:02 [DBG] Unable to use language locale ‘unm_US.UTF-8’
2021/09/09 17:13:02 [DBG] Unable to use language locale ‘yuw_PG.UTF-8’
2021/09/09 17:13:02 [INF] Running system compatibility checks.
2021/09/09 17:13:02 [INF] Success: System is compatible
2021/09/09 17:13:02 [DBG] Scanning media
2021/09/09 17:13:02 [DBG] partprobe -s
2021/09/09 17:13:02 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:02 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:02 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:02 [DBG] cmd.Env:
2021/09/09 17:13:03 [DBG] Warning: Partition(s) 1 on /dev/sda have been written, but we have been unable to inform the kernel of the change, probably because it/they are in use. As a result, the old partition(s) will remain in use. You should reboot now before making further changes.
2021/09/09 17:13:03 [DBG] /dev/sda: msdos partitions 2
2021/09/09 17:13:03 [DBG] /dev/nvme0n1: gpt partitions
2021/09/09 17:13:03 [DBG] udevadm settle --timeout 10
2021/09/09 17:13:03 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:03 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:03 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:03 [DBG] cmd.Env:
2021/09/09 17:13:03 [DBG] lsblk --exclude 1,2,11 -J -b -O
2021/09/09 17:13:03 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:03 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:03 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:03 [DBG] cmd.Env:
2021/09/09 17:13:03 [DBG] parted --machine --script – /dev/nvme0n1 unit B print free
2021/09/09 17:13:03 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:03 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:03 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:03 [DBG] cmd.Env:
2021/09/09 17:13:03 [DBG] setPartitionTable() line is “BYT”
2021/09/09 17:13:03 [DBG] setPartitionTable() line is “/dev/nvme0n1:512110190592B:nvme:512:512:gpt:KXG60ZNV512G NVMe TOSHIBA 512GB:”
2021/09/09 17:13:03 [DBG] setPartitionTable() line is “1:17408B:512110173695B:512110156288B:free”
2021/09/09 17:13:03 [DBG] setPartitionTable() line is “”
2021/09/09 17:13:07 [DBG] Launching MenuView
2021/09/09 17:13:07 [DBG] Before making ComboBox
2021/09/09 17:13:07 [DBG] buildMediaLists: Set DefaultSwapFileSize: 64MiB
2021/09/09 17:13:07 [DBG] FindSafeInstallTargets: found whole disk nvme0n1
2021/09/09 17:13:07 [DBG] FindAllInstallTargets: found whole disk nvme0n1
2021/09/09 17:13:07 [DBG] Adding safe install target nvme0n1
2021/09/09 17:13:07 [DBG] ComboBox entry selected is: nvme0n1
2021/09/09 17:13:17 [DBG] Refreshing page…
2021/09/09 17:13:17 [DBG] Adding safe install target nvme0n1
2021/09/09 17:13:17 [DBG] Selecting Safe target from active screen: nvme0n1
2021/09/09 17:13:17 [DBG] ComboBox entry selected is: nvme0n1
2021/09/09 17:13:19 [DBG] Adding destructive install target nvme0n1
2021/09/09 17:13:19 [DBG] Selecting Destructive target from active screen: nvme0n1
2021/09/09 17:13:19 [DBG] ComboBox entry selected is: nvme0n1
2021/09/09 17:13:21 [DBG] Destructive Install chooserCombo selected 0
2021/09/09 17:13:21 [DBG] Destructive Install Target {nvme0n1 KXG60ZNV512G NVMe TOSHIBA 512GB true false true false false 0 512110190592}
2021/09/09 17:13:21 [DBG] Found the free partition to update: &{0 0 512110190592 512110190592 free }
2021/09/09 17:13:21 [DBG] Adding the new partition: &{1 0 157286399 157286400 }
2021/09/09 17:13:21 [DBG] AddChild: child.Name is “nvme0n1p1”
2021/09/09 17:13:21 [DBG] Added new child partition: &{nvme0n1p1 vfat /boot boot 157286400 part false false true true true false false 1 }
2021/09/09 17:13:21 [DBG] Free partition newStart: 157286400, newSize: 511952904192
2021/09/09 17:13:21 [DBG] Found enough free to add back: &{0 157286400 512110190592 511952904192 free }
2021/09/09 17:13:21 [DBG] Not the right partition, adding back: &{1 0 157286399 157286400 }
2021/09/09 17:13:21 [DBG] Found the free partition to update: &{0 157286400 512110190592 511952904192 free }
2021/09/09 17:13:21 [DBG] Adding the new partition: &{2 157286400 512110190591 511952904192 }
2021/09/09 17:13:21 [DBG] AddChild: child.Name is “nvme0n1p2”
2021/09/09 17:13:21 [DBG] Added new child partition: &{nvme0n1p2 ext4 / root 511952904192 part false false true true true false false 2 }
2021/09/09 17:13:21 [DBG] Free partition newStart: 512110190592, newSize: 0
2021/09/09 17:13:21 [DBG] No Free space left: &{0 157286400 512110190592 511952904192 free }
2021/09/09 17:13:23 [DBG] Starting in addMode
2021/09/09 17:13:34 [DBG] /usr/bin/cracklib-check
2021/09/09 17:13:34 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:34 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:34 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:34 [DBG] cmd.Env:
2021/09/09 17:13:35 [DBG] /usr/bin/cracklib-check
2021/09/09 17:13:35 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:35 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:35 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:35 [DBG] cmd.Env:
2021/09/09 17:13:35 [DBG] /usr/bin/cracklib-check
2021/09/09 17:13:35 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:35 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:35 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:35 [DBG] cmd.Env:
2021/09/09 17:13:36 [DBG] /usr/bin/cracklib-check
2021/09/09 17:13:36 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:36 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:36 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:36 [DBG] cmd.Env:
2021/09/09 17:13:36 [DBG] /usr/bin/cracklib-check
2021/09/09 17:13:36 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:36 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:36 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:36 [DBG] cmd.Env:
2021/09/09 17:13:36 [DBG] /usr/bin/cracklib-check
2021/09/09 17:13:36 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:36 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:36 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:36 [DBG] cmd.Env:
2021/09/09 17:13:36 [DBG] /usr/bin/cracklib-check
2021/09/09 17:13:36 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:36 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:36 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:36 [DBG] cmd.Env:
2021/09/09 17:13:37 [DBG] /usr/bin/cracklib-check
2021/09/09 17:13:37 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:37 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:37 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:37 [DBG] cmd.Env:
2021/09/09 17:13:37 [DBG] /usr/bin/cracklib-check
2021/09/09 17:13:37 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:37 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:37 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:37 [DBG] cmd.Env:
2021/09/09 17:13:40 [DBG] page.model.Users[0]: &{Login:Brett UserName:Brett Password: Admin:true SSHKeys:}
2021/09/09 17:13:45 [DBG] lsblk --exclude 1,2,11 -J -b -O /dev/nvme0n1
2021/09/09 17:13:45 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:45 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:45 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:45 [DBG] cmd.Env:
2021/09/09 17:13:45 [INF] Cleaning disk(dryrun): /dev/nvme0n1 with ForceDestructive: false
2021/09/09 17:13:45 [DBG] Partitions before sorting:
2021/09/09 17:13:45 [DBG] nvme0n1p1: fsType=vfat, mount=/boot, size=157286400, type=part
2021/09/09 17:13:45 [DBG] nvme0n1p2: fsType=ext4, mount=/, size=511952904192, type=part
2021/09/09 17:13:45 [DBG] Partitions after sorting:
2021/09/09 17:13:45 [DBG] nvme0n1p1: fsType=vfat, mount=/boot, size=157286400, type=part
2021/09/09 17:13:45 [DBG] nvme0n1p2: fsType=ext4, mount=/, size=511952904192, type=part
2021/09/09 17:13:45 [DBG] parted --machine --script – /dev/nvme0n1 unit B print
2021/09/09 17:13:45 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:45 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:45 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:45 [DBG] cmd.Env:
2021/09/09 17:13:45 [DBG] MediaChange: nvme0n1: WARNING: Selected media will be erased.
2021/09/09 17:13:45 [DBG] MediaChange: nvme0n1: WARNING: New Partition table will be created.
2021/09/09 17:13:45 [DBG] MediaChange: nvme0n1: Add new partition. [150MiB]
2021/09/09 17:13:45 [DBG] MediaChange: nvme0n1: Add new partition. [476.8GiB]
2021/09/09 17:13:45 [DBG] MediaChange: nvme0n1p1: Format partition as vfat. [/boot]
2021/09/09 17:13:45 [DBG] MediaChange: nvme0n1p2: Format partition as ext4. [/]
2021/09/09 17:13:45 [DBG] MediaChange: /var/swapfile (64MiB)
2021/09/09 17:13:50 [DBG] timeout --kill-after=30s 30s curl --no-sessionid -o /tmp/clr-installer-yaml-774323191 -s -f https://cdn.download.clearlinux.org/releases/35030/clear/config/image/.data/pre-gui-install-msg.yaml
2021/09/09 17:13:50 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:50 [INF] Running pre-install hooks
2021/09/09 17:13:50 [DBG] Clear Linux OS version: latest
2021/09/09 17:13:50 [DBG] lsblk --exclude 1,2,11 -J -b -O /dev/nvme0n1
2021/09/09 17:13:50 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:50 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:50 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:50 [DBG] cmd.Env:
2021/09/09 17:13:50 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:50 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:50 [DBG] cmd.Env:
2021/09/09 17:13:50 [INF] Cleaning disk(action): /dev/nvme0n1 with ForceDestructive: false
2021/09/09 17:13:50 [DBG] FetchRemoteConfigFile failed : “exit status 6”
2021/09/09 17:13:50 [DBG] Failed to download the Pre-Installation message: exit status 6
2021/09/09 17:13:50 [INF] Writing partition table to: nvme0n1
2021/09/09 17:13:50 [DBG] parted -s /dev/nvme0n1 mklabel gpt
2021/09/09 17:13:50 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:50 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:50 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:50 [DBG] cmd.Env:
2021/09/09 17:13:50 [INF] Updating partition table for: nvme0n1
2021/09/09 17:13:50 [DBG] Partitions before sorting:
2021/09/09 17:13:50 [DBG] nvme0n1p1: fsType=vfat, mount=/boot, size=157286400, type=part
2021/09/09 17:13:50 [DBG] nvme0n1p2: fsType=ext4, mount=/, size=511952904192, type=part
2021/09/09 17:13:50 [DBG] Partitions after sorting:
2021/09/09 17:13:50 [DBG] nvme0n1p1: fsType=vfat, mount=/boot, size=157286400, type=part
2021/09/09 17:13:50 [DBG] nvme0n1p2: fsType=ext4, mount=/, size=511952904192, type=part
2021/09/09 17:13:50 [DBG] parted --machine --script – /dev/nvme0n1 unit B print
2021/09/09 17:13:50 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:50 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:50 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:50 [DBG] cmd.Env:
2021/09/09 17:13:50 [DBG] WritePartitionTable: processing child: &{nvme0n1p1 vfat /boot boot 157286400 part false false true true true false false 1 }
2021/09/09 17:13:50 [DBG] WritePartitionTable: WholeDisk mode
2021/09/09 17:13:50 [DBG] WritePartitionTable: start: 0, end: 157286400
2021/09/09 17:13:50 [DBG] WritePartitionTable: mkPartCmd: mkpart EFI fat32 0% 157M
2021/09/09 17:13:50 [DBG] parted -a optimal /dev/nvme0n1 unit MB --script – mkpart EFI fat32 0% 157M
2021/09/09 17:13:50 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:50 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:50 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:50 [DBG] cmd.Env:
2021/09/09 17:13:50 [DBG] parted --machine --script – /dev/nvme0n1 unit B print
2021/09/09 17:13:50 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:50 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:50 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:50 [DBG] cmd.Env:
2021/09/09 17:13:50 [DBG] WritePartitionTable: processing child: &{nvme0n1p2 ext4 / root 511952904192 part false false true true true false false 2 }
2021/09/09 17:13:50 [DBG] WritePartitionTable: WholeDisk mode
2021/09/09 17:13:50 [DBG] WritePartitionTable: start: 157286400, end: 512110190592
2021/09/09 17:13:50 [DBG] WritePartitionTable: mkPartCmd: mkpart / 157M 512110M
2021/09/09 17:13:50 [DBG] parted -a optimal /dev/nvme0n1 unit MB --script – mkpart / 157M 512110M
2021/09/09 17:13:50 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:50 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:50 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:50 [DBG] cmd.Env:
2021/09/09 17:13:50 [DBG] parted --machine --script – /dev/nvme0n1 unit B print
2021/09/09 17:13:50 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:50 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:50 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:50 [DBG] cmd.Env:
2021/09/09 17:13:50 [INF] Setting GUIDs for device: /dev/nvme0n1
2021/09/09 17:13:50 [DBG] sgdisk /dev/nvme0n1 --typecode=1:C12A7328-F81F-11D2-BA4B-00A0C93EC93B
2021/09/09 17:13:50 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:50 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:50 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:50 [DBG] cmd.Env:
2021/09/09 17:13:51 [DBG] The operation has completed successfully.
2021/09/09 17:13:51 [DBG] sgdisk /dev/nvme0n1 --typecode=2:4F68BCE3-E8CD-4DB1-96E7-FBCAF984B709
2021/09/09 17:13:51 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:51 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:51 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:51 [DBG] cmd.Env:
2021/09/09 17:13:52 [DBG] The operation has completed successfully.
2021/09/09 17:13:52 [INF] Setting boot partition: nvme0n1p1 [boot]
2021/09/09 17:13:52 [DBG] parted /dev/nvme0n1 set 1 boot on
2021/09/09 17:13:52 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:52 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:52 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:52 [DBG] cmd.Env:
2021/09/09 17:13:52 [DBG] Information: You may need to update /etc/fstab.
2021/09/09 17:13:52 [DBG]

2021/09/09 17:13:52 [DBG] partprobe /dev/nvme0n1
2021/09/09 17:13:52 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:52 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:52 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:52 [DBG] cmd.Env:
2021/09/09 17:13:56 [INF] Writing vfat file system to nvme0n1p1 ‘/boot’
2021/09/09 17:13:56 [DBG] mkfs.vfat -n boot -F32 /dev/nvme0n1p1
2021/09/09 17:13:56 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:56 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:56 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:56 [DBG] cmd.Env:
2021/09/09 17:13:56 [DBG] mkfs.fat: Warning: lowercase labels might not work properly on some systems
2021/09/09 17:13:56 [DBG] mkfs.fat 4.2 (2021-01-31)
2021/09/09 17:13:56 [DBG] blkid --probe /dev/nvme0n1p1 --output export
2021/09/09 17:13:56 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:56 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:56 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:56 [DBG] cmd.Env:
2021/09/09 17:13:57 [DBG] updatePartitionInfo: Updated /dev/nvme0n1p1 LABEL: boot
2021/09/09 17:13:57 [DBG] updatePartitionInfo: Updated /dev/nvme0n1p1 UUID: 0D4E-7133
2021/09/09 17:13:57 [DBG] updatePartitionInfo: Ignoring unknown line:
2021/09/09 17:13:57 [INF] Writing ext4 file system to nvme0n1p2 ‘/’
2021/09/09 17:13:57 [DBG] mkfs.ext4 -L root -v -F -b 4096 /dev/nvme0n1p2
2021/09/09 17:13:57 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:57 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:57 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:57 [DBG] cmd.Env:
2021/09/09 17:13:57 [DBG] mke2fs 1.46.4 (18-Aug-2021)
2021/09/09 17:13:57 [DBG] fs_types for mke2fs.conf resolution: ‘ext4’
2021/09/09 17:13:57 [DBG] Discarding device blocks: 0/124988416
2021/09/09 17:13:57 [DBG] done
2021/09/09 17:13:57 [DBG] Filesystem label=root
2021/09/09 17:13:57 [DBG] OS type: Linux
2021/09/09 17:13:57 [DBG] Block size=4096 (log=2)
2021/09/09 17:13:57 [DBG] Fragment size=4096 (log=2)
2021/09/09 17:13:57 [DBG] Stride=0 blocks, Stripe width=256 blocks
2021/09/09 17:13:57 [DBG] 31252480 inodes, 124988416 blocks
2021/09/09 17:13:57 [DBG] 6249420 blocks (5.00%) reserved for the super user
2021/09/09 17:13:57 [DBG] First data block=0
2021/09/09 17:13:57 [DBG] Maximum filesystem blocks=2273312768
2021/09/09 17:13:57 [DBG] 3815 block groups
2021/09/09 17:13:57 [DBG] 32768 blocks per group, 32768 fragments per group
2021/09/09 17:13:57 [DBG] 8192 inodes per group
2021/09/09 17:13:57 [DBG] Filesystem UUID: a307dcb5-a504-4cd2-b7a8-221f57df00f6
2021/09/09 17:13:57 [DBG] Superblock backups stored on blocks:
2021/09/09 17:13:57 [DBG] 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
2021/09/09 17:13:57 [DBG] 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,
2021/09/09 17:13:57 [DBG] 102400000
2021/09/09 17:13:57 [DBG] Allocating group tables: 0/3815
2021/09/09 17:13:57 [DBG]
2021/09/09 17:13:57 [DBG] done
2021/09/09 17:13:57 [DBG] Writing inode tables: 0/3815
2021/09/09 17:13:57 [DBG] done
2021/09/09 17:13:57 [DBG] Creating journal (262144 blocks):
2021/09/09 17:13:57 [DBG] done
2021/09/09 17:13:57 [DBG] Writing superblocks and filesystem accounting information:
2021/09/09 17:13:57 [DBG] 0/3815
2021/09/09 17:13:57 [DBG]
2021/09/09 17:13:57 [DBG] done
2021/09/09 17:13:57 [DBG] blkid --probe /dev/nvme0n1p2 --output export
2021/09/09 17:13:57 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:57 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:57 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:57 [DBG] cmd.Env:
2021/09/09 17:13:57 [DBG] updatePartitionInfo: Updated /dev/nvme0n1p2 LABEL: root
2021/09/09 17:13:57 [DBG] updatePartitionInfo: Updated /dev/nvme0n1p2 UUID: a307dcb5-a504-4cd2-b7a8-221f57df00f6
2021/09/09 17:13:57 [DBG] updatePartitionInfo: Ignoring unknown line:
2021/09/09 17:13:57 [DBG] partprobe -s
2021/09/09 17:13:57 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:57 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:57 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:57 [DBG] cmd.Env:
2021/09/09 17:13:58 [DBG] Warning: Partition(s) 1 on /dev/sda have been written, but we have been unable to inform the kernel of the change, probably because it/they are in use. As a result, the old partition(s) will remain in use. You should reboot now before making further changes.
2021/09/09 17:13:58 [DBG] /dev/sda: msdos partitions 2
2021/09/09 17:13:58 [DBG] /dev/nvme0n1: gpt partitions 1 2
2021/09/09 17:13:58 [DBG] udevadm settle --timeout 10
2021/09/09 17:13:58 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:58 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:58 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:58 [DBG] cmd.Env:
2021/09/09 17:13:58 [DBG] lsblk --exclude 1,2,11 -J -b -O
2021/09/09 17:13:58 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:58 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:58 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:58 [DBG] cmd.Env:
2021/09/09 17:13:58 [DBG] parted --machine --script – /dev/loop0 unit B print free
2021/09/09 17:13:58 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:58 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:58 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:58 [DBG] cmd.Env:
2021/09/09 17:13:58 [WRN] getPartitionTable() had an error reading partition table “Error: /dev/loop0: unrecognised disk label\nBYT;\n/dev/loop0:2893524992B:loopback:512:512:unknown:Loopback device:;\n”
2021/09/09 17:13:58 [DBG] setPartitionTable() line is “”
2021/09/09 17:13:58 [DBG] parted --machine --script – /dev/sda unit B print free
2021/09/09 17:13:58 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:58 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:58 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:58 [DBG] cmd.Env:
2021/09/09 17:13:58 [DBG] setPartitionTable() line is “BYT”
2021/09/09 17:13:58 [DBG] setPartitionTable() line is “/dev/sda:63864569856B:scsi:512:512:msdos:Generic MassStorageClass:”
2021/09/09 17:13:58 [DBG] setPartitionTable() line is “1:1024B:69631B:68608B:free”
2021/09/09 17:13:58 [DBG] setPartitionTable() line is “2:69632B:104927231B:104857600B:fat16::esp”
2021/09/09 17:13:58 [DBG] setPartitionTable() line is “1:104927232B:63864569855B:63759642624B:free”
2021/09/09 17:13:58 [DBG] setPartitionTable() line is “”
2021/09/09 17:13:58 [DBG] parted --machine --script – /dev/nvme0n1 unit B print free
2021/09/09 17:13:58 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:58 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:58 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:58 [DBG] cmd.Env:
2021/09/09 17:13:58 [DBG] setPartitionTable() line is “BYT”
2021/09/09 17:13:58 [DBG] setPartitionTable() line is “/dev/nvme0n1:512110190592B:nvme:512:512:gpt:KXG60ZNV512G NVMe TOSHIBA 512GB:”
2021/09/09 17:13:58 [DBG] setPartitionTable() line is “1:17408B:1048575B:1031168B:free”
2021/09/09 17:13:58 [DBG] setPartitionTable() line is “1:1048576B:157286399B:156237824B:fat32:EFI:boot, esp”
2021/09/09 17:13:58 [DBG] setPartitionTable() line is “2:157286400B:512109838335B:511952551936B:ext4:/:”
2021/09/09 17:13:58 [DBG] setPartitionTable() line is “1:512109838336B:512110173695B:335360B:free”
2021/09/09 17:13:58 [DBG] setPartitionTable() line is “”
2021/09/09 17:13:58 [INF] Mounting: /
2021/09/09 17:13:58 [INF] Running post-image hooks
2021/09/09 17:13:58 [INF] Installation Steps Complete
2021/09/09 17:13:58 [DBG] timeout --kill-after=30s 30s curl --no-sessionid -o /tmp/clr-installer-yaml-292579562 -s -f ://cdn.download.clearlinux.org/releases/35030/clear/config/image/.data/post-gui-install-msg.yaml
2021/09/09 17:13:58 [DBG] sync user is PKEXEC_UID=#1000
2021/09/09 17:13:58 [DBG] Gnome Proxy Mode: none
2021/09/09 17:13:58 [DBG] [Previous line repeated 4 times]
2021/09/09 17:13:58 [DBG] cmd.Env:
2021/09/09 17:13:58 [DBG] FetchRemoteConfigFile failed : “exit status 6”
2021/09/09 17:13:58 [DBG] Failed to download the Post-Installation message: exit status 6`

2

Your failed install sounds a lot like my post"Clear will not install to NVME".

1 Like
3

Indeed. Similar situations anyway. I think our log output is slightly different. Not a lot going on in these forums it would seem.

1 Like
4

I noticed that my successful install to my HD had the similar warnings as the unsuccessful install. This is the is the actual install failed.

Screenshot from 2021-09-12 11-12-20
Screenshot from 2021-09-12 11-12-202960×1160 200 KB

5

I’ll add another piece of info. Just for giggles, I attempted to install clear to a sata SSD via a usb 3.0 adapter. Exact same error.

6

Did you set your wifi connection before starting?
The last lines of your log show that you can’t curl out to the network.

I had the same thing, turned out there was no network connection. Installed successfully to two machines with NMVE today.